SLDV technology for measurement of mistuned bladed disc vibration

Bladed discs are very sensitive structures and the amplitude vibration of each blade can vary significantly from blade to blade due to a series of factors such as geometrical inhomogeneity between blades or material properties. These factors lead to bladed disks mistuned thus the forced response amplitudes can be much higher than the level predicted for a tuned assembly. Designed models need to be “validate” to predict the response of a real bladed disc within the tolerances set by the manufactures and this process is very expensive as well as difficult. The validation process needs “reference data” as fundamental input against what all predictions can be compared and validated. Data that can be provided both under stationary conditions and under rotating conditions and the latter is the most difficult to achieve, especially for bladed disc assemblies which are very sensitive to any structural modification as it could be attaching a transducer to measure vibrations. There are contact-less measurement techniques available which, however, provide limited information because they can measure only limited areas of the vibrating structures. The aim of this study is to design measurement methods, using a standard Scanning Laser Doppler Vibrometer (SLDV) and to integrate it into a software platform which will be able to handle a series of measurement tasks both under stationary and rotating conditions. The main contribution of this thesis is to extend the use of Continuous Scanning LDV (CSLDV) to the rotating structures, such as bladed discs, thus to perform synchronous measurements. Hence, a bladed disc is needed to be designed to perform vibration predictions and measurements and a mathematical model of the measurement test to control, critically, all possible sources of errors involved in measurement under rotating conditions; all these to produce a robust measurement method. While the primary focus is the measurement method, the study also extends to evaluation of the sensitivity properties of the bladed disk test pieces that are the object of the measurement tool

Response phase mapping of nonlinear joint dynamics using continuous scanning LDV measurement method

AIP PublishingInternational audienceThis study aims to present a novel work aimed at locating discrete nonlinearities in mechanical assemblies. The long term objective is to develop a new metric for detecting and locating nonlinearities using Scanning LDV systems (SLDV). This new metric will help to improve the modal updating, or validation, of mechanical assemblies presenting discrete and sparse nonlinearities. It is well established that SLDV systems can scan vibrating structures with high density of measurement points and produc e highly defined Operational Deflection Shapes (ODSs). This paper will present some insights on how to use response phase mapping for locating nonlinearities of a bolted flange. This type of structure presents two types of nonlinearities, which are geometr ical and frictional joints. The interest is focussed on the frictional joints and, therefore, the ability to locate which joint s are responsible for nonlinearity is seen highly valuable for the model validation activities